• 
    
        <tbody id="emfrg"><pre id="emfrg"></pre></tbody>
        <button id="emfrg"><object id="emfrg"><menuitem id="emfrg"></menuitem></object></button>

        Welcome to the Suzhou Amsedm Machine Co.ltd!
        Your location: Home > Industry News >
        Contact Us

        Suzhou Amazon Machine Tool Co., Ltd.

        Tel:86-512-6610 1966

        Fax:86-512-6610 2966

        Web:www.www.stkir.com

        E-mail:tzyake@tzyake.com

        Add:Shiqiao Village, Beiqiao Street, Xiangcheng District, Suzhou City, Jiangsu Province

        Notes for CNC EDM Puncher in Machine Tool Installation Site

        Author: ComeFrom: Date:2019-1-16 10:07:23 Hits:770

        Everyone wants to know what should be paid attention to when CNC EDP is installed in the machine tool place. Now let's share with you:
        _The environmental temperature of the machine tool installation place should be between 10 ~30 C.
        (2) In places with stamping equipment and planer, the vibration and impact are not suitable for the installation of machine tools. However, if there is no better place than this, the installation of machine tools in this place should take seismic measures.
        (3) Because the operation panel is easy to corrode, the place to be placed should be avoided as far as possible near the heat treatment workshop, electroplating workshop and similar places.
        (5) Dust-laden places are not suitable for machine tool maintenance.
        (5) Inspect the installation site according to the general layout, and consider whether there is enough space to install the machine tool. At the same time, a certain width space should be ensured between the machine tool and the machine tool, so that it is easy to operate and maintain the machine tool.
        (5) Check the width and height of the front of the unloading place, and take a good view of the handling route of the machine tool in advance, so as to prevent damage to the machine tool in the process of installation.
        Setting up of CNC EDM Piercing Machine Tool
        (1) Arrange machine tools according to the layout of machine tools. Considering the maintenance and maintenance of machine tools, 80 cm wide space should be ensured around the machine tools and between them.
        (2) Put four sole screw into the hole at the bottom of the upper machine tool bed (front and back two), and pad the round pad iron under the screw separately (inside the bed).
        (3) After placement, the angle iron of the fixed worktable is removed and each housing is installed.
        (5) Place the worktable in the center of the machine tool and clean the surface of the worktable.
        (5) Place two bench level gauges vertically and horizontally on the worktable to adjust the anchor bolts so that the machine tool reaches the horizontal position, and the tolerance of the level should be within 0.04 m m/m.
        Tiangong Electrical Processing Plant provides professional CNC equipment such as ordinary piercing machine, CNC electric spark piercing machine, small-hole piercing machine, high-speed electric spark piercing machine, 10,000-arm drilling piercing machine, CNC piercing machine, rocker-arm electric spark piercing machine, fine-hole discharging machine, deep-hole machine and so on. The company can customize various kinds of electrical equipment according to the special requirements of customers. Spark processing machine, at the same time, can provide customers with a complete set of electrical processing solutions.

        Next:Teach you how to maintain the electric spark piercing machine
        无缓冲不卡无码Av在线观看,影音先锋亚洲欧美精品,中文字幕乱码av,亚洲中文在线播放二区-亚洲白拍偷自拍网|图片区 亚洲 卡通 另类 动漫-国产清晰在线观看